Added almost 10 years ago | 00:30:01 | 98182 views
Machining Skills for Prototype Development:1) Basic 32) Good Practice - Clean Up3) Small Belt Sander Configurations4) Grinder Operations and Materials5) Deburring and Buffing6) Finishing TechniquesDuration 30:02
Added almost 10 years ago | 00:34:31 | 133959 views
Duration 34:32Machine Shop 10 Lathe 31 Lathe Chuck2 Lathe Arbors 3 Turning Between Centers 4 Face Plate Irregular Shapes 5 Face Plate Thin Materials
Added almost 10 years ago | 00:40:32 | 403634 views
Machining Skills for Prototype Development:1) Basic2) Layout Techniques3) Basic Tools: Drill Press, Band Saw, Belt Sander & Grinder4) Locating and Drilling Holes5) Tapping Holesduration 40:32
Added almost 10 years ago | 00:47:02 | 116367 views
Duration 47:33Lathe 21 Tapping2 Boring3 Knurling4 Cutting Tapers with the Compound5 Turning Shafts Use of live center6 Single Point Thread Turning
Added almost 10 years ago | 00:45:02 | 109115 views
Duration 45:02Machine Shop 8 Lathe 11 The Lathe Components @ Set-Up Axes and Feeds 2 Turning Tools 3 Turning and Facing 4 Cutting Off a Part
Added almost 10 years ago | 00:45:32 | 104698 views
Duration 45:33Machine Shop 7 Milling Machine 4 1 Reaming Holes Reamer is used to make a drilled hole larger and smoother within 2/10000" of it's diameter 2 Boring Holes A Boring Head is used for making very accurate holes; also used on ...
Added almost 10 years ago | 00:46:32 | 105110 views
Duration 46:33Machine Shop 6 Milling Machine 3 1 Milling Machine 3 Squaring a part, maching all surfaces so they are flat and perpendicular to one another and nominally to the part that will be milled; removing burrs 2 Squaring a Plate ...
Added almost 10 years ago | 01:03:33 | 116984 views
Duration 1:03:33Machine Shop 5 Milling Machine 2 1 Milling Machine 2 Square and Hex Collett Blocks-used to hold/clamp parts to machine features on 4 and 6 sides of a part, respectively 2 V Blocks Holding parts to machine features into p...
Added almost 10 years ago | 00:50:32 | 148155 views
Duration 50:33Machine Shop 4 Milling Machine 1 1 Milling Machine 1 Layout & Use; what the different parts do 2 Quill Feed Allows you to move tool up and down 3 Axis Handfeed Feed/Crank on Axis with Dials to adjust the Bed 4 Gibb Loc...
Added almost 10 years ago | 00:57:33 | 130621 views
Machining Skills for Prototype Development:1) Basic 22) Drilling Holes3) Special Drills for Plastics and Hard or Abrasive Materials4) Drill Press Limitations5) Bandsaw6) Suitable Speeds, Feeds and Materials7) Bandsaw Setup8) Using the D...