Machine Shop 5

Duration 1:03:33

Machine Shop 5 Milling Machine 2

1 Milling Machine
2 Square and Hex Collett Blocks-used to hold/clamp parts to machine features on 4 and 6 sides of a part, respectively 2 V Blocks Holding parts to machine features into parts and end of parts
3 Hold-down Clamps Used to hold large or irregularly shaped parts
4 Using Angle Blocks Used to hold materials to machine features not perpendicular on a part
5 Drill Press Vice Used to hold a part to machine a feature @ 45? angle and other positions/angles Also used with angle blocks to hold parts
6 Lathe Chuck With Vise Used to hold parts in the milling machine; not accurate method, but quick/convenient
7 Double Sided Tape Used to hold a part in a vice securely without distortion
8 Squaring High Aspect Ratio Parts Used to hold a part to be machined securely and squared
9 Right Angle Attachment A right angle gear box to mill features in an end of a larger/slender part that is clamped in the vice.
10 Slitting Saw A saw blade that is used to cut slots/slits/features in a part Can also be used with a right angle attachment
11 Rotary Table A bench/table attached to the bed of the machine used to machine circular parts, grooves, circles, segments Dial indicator and Co-Axe indicator uses to square/center the Table to the Y axes
12 5 C Collett Indexer Used to hold Colletts and position parts in up to 24 positions for various milling features

Comments (10)

Machine Shop 5 Milling Machine 2 1 Milling Machine 2 Square and Hex Collett Blocks-used to hold/clamp parts to machine features on 4 and 6 sides of a part, respectively 2 V Blocks Holding parts to machine features into parts and end of parts 3 Hold-down Clamps Used to hold large or irregularly shaped parts 4 Using Angle Blocks Used to hold materials to machine features not perpendicular on a part 5 Drill Press Vice Used to hold a part to machine a feature @ 45˚ angle and other positions/angles Also used with angle blocks to hold parts 6 Lathe Chuck With Vise Used to hold parts in the milling machine; not accurate method, but quick/convenient 7 Double Sided Tape Used to hold a part in a vice securely without distortion 8 Squaring High Aspect Ratio Parts Used to hold a part to be machined securely and squared 9 Right Angle Attachment A right angle gear box to mill features in an end of a larger/slender part that is clamped in the vice. 10 Slitting Saw A saw blade that is used to cut slots/slits/features in a part Can also be used with a right angle attachment 11 Rotary Table A bench/table attached to the bed of the machine used to machine circular parts, grooves, circles, segments Dial indicator and Co-Axe indicator uses to square/center the Table to the Y axes 12 5 C Collett Indexer Used to hold Colletts and position parts in up to 24 positions for various milling features

Posted over 4 years by Anonymous User

End.

Posted over 2 years by Anonymous 01:00:22

He can also move the ram in or out.

Posted over 2 years by Anonymous 00:52:25

Co-axial centre finder

Posted over 2 years by Anonymous 00:47:25

Table is co-axial with quill, how can he mill far from the axis?

Posted over 2 years by Anonymous 00:52:25

It is probably a good idea to wear some sort of latex or nitrile gloves when using any solvents or cleaners :)

Posted over 2 years by Anonymous 00:14:08

Then he simply moves the table in the X or Y axis to offset from true center